ACQUASHIELD 25KG

WATERPROOFING BASE

Two-component mortar consisting of cements, fine aggregates with graded particle size, special additives (Component A) and synthetic polymers in aqueous dispersion (Component B). Easy to apply on both horizontal and vertical surfaces, it offers outstanding adhesion. The formula was created to protect from aging due to the action of water, salts, frost, cementitious plasters and artifact in concrete, even in contact with ground, as well as cementitious screeds in external places: terraces, balconies and swimming pools.

TECHNICAL FEATURES

Two components, flexible waterproof coating for balconies, terraces, swimming pools, concrete artifacts

Total and long-lasting protection and waterproofing of screed on balconies and terraces.
• Waterproofing of swimming pools, baths, showers before the installation of ceramic tiles.
• Waterproof coating on walls in contact with the ground, foundations and lift-shafts.
• Waterproof coating of water tanks.
• Waterproofing on old ceramic floors.

AQUAMASTER 10KG

WATERPROOFING BASE

Aquamaster is a ready-to-use liquid membrane made from synthetic resins in aqueous dispersion, solvent-free, used for the waterproofing of indoor and outdoor wet areas.
Does not require reinforcing mesh or fabric and sealing bands to protect the corners and edges of the waterproofing system.

TECHNICAL FEATURES

Aquamaster is a ready-to-use liquid membrane made from synthetic resins in aqueous dispersion, solvent-free, used for the waterproofing of indoor and outdoor wet areas.
Does not require reinforcing mesh or fabric and sealing bands to protect the corners and edges of the waterproofing system.

Reusable product. Any leftover material, if stored in the original packaging at temperatures between +5°C and +35°C, can be reused even after months, thus avoiding wastage
The fast drying time allows the application of multiple coats just a short time apart, making it possible to complete waterproofing in one day only
Coverings can be installed just 24 hours after the application of the last coat with cementitious adhesives in class C2 or reactive adhesives in class R2 according to EN 12004 Product exempt from restrictions for road, sea, air and rail transport

AQUAMASTER 20KG

WATERPROOFING BASE

Aquamaster is a ready-to-use liquid membrane made from synthetic resins in aqueous dispersion, solvent-free, used for the waterproofing of indoor and outdoor wet areas.
Does not require reinforcing mesh or fabric and sealing bands to protect the corners and edges of the waterproofing system.

TECHNICAL FEATURES

Aquamaster is a ready-to-use liquid membrane made from synthetic resins in aqueous dispersion, solvent-free, used for the waterproofing of indoor and outdoor wet areas.
Does not require reinforcing mesh or fabric and sealing bands to protect the corners and edges of the waterproofing system.

Reusable product. Any leftover material, if stored in the original packaging at temperatures between +5°C and +35°C, can be reused even after months, thus avoiding wastage
The fast drying time allows the application of multiple coats just a short time apart, making it possible to complete waterproofing in one day only
Coverings can be installed just 24 hours after the application of the last coat with cementitious adhesives in class C2 or reactive adhesives in class R2 according to EN 12004 Product exempt from restrictions for road, sea, air and rail transport

BENFERFLEX+S1 GREY 25KG

ADHESIVE

Adhesive in powder, consisting of cements, graded particle size aggregates, synthetic resins and special additives. It has been formulated and developed for rapid, reliable installation of almost the totality of ceramic material, even on non-absorbent substrates and onto substrates subject to slight dimensional variation. The high resistance to vertical sliding allows to tile from the top down.
Thanks to its particular composition, BENFERFLEX+S1 can be mixed with a higher percentage of water to allow for complete “wetting” of the back of the tiles, even on large size formats, with no need for double buttering.

TECHNICAL FEATURES

• Highly deformable
• Multi-purpose, can be used as self soaking adhesive
• Highly resistant to lowering, with outstanding application properties
• Long open time
• Very easy to use
• For heated substrates
• Dust reduced
• Tested in accordance with European standard EN 12004, C2 TE S1
• High yield
• For exterior and interior use

Laying of porcelain tiles, thin ceramic slabs, non absorbent single-fired tiles, double-fired tiles, and natural stones (water stable), even large size, and glass mosaic in:
• Interior and exterior walls and floors
• Heavy duty areas
• In conjunction with ACQUASHIELD waterproofing systems
• On top of old wall and floor tiles

BENFERFLEX+S1 WHITE 25KG

ADHESIVE

Adhesive in powder, consisting of cements, graded particle size aggregates, synthetic resins and special additives. It has been formulated and developed for rapid, reliable installation of almost the totality of ceramic material, even on non-absorbent substrates and onto substrates subject to slight dimensional variation. The high resistance to vertical sliding allows to tile from the top down.
Thanks to its particular composition, BENFERFLEX+S1 can be mixed with a higher percentage of water to allow for complete “wetting” of the back of the tiles, even on large size formats, with no need for double buttering.

TECHNICAL FEATURES

• Highly deformable
• Multi-purpose, can be used as self soaking adhesive
• Highly resistant to lowering, with outstanding application properties
• Long open time
• Very easy to use
• For heated substrates
• Dust reduced
• Tested in accordance with European standard EN 12004, C2 TE S1
• High yield
• For exterior and interior use

Laying of porcelain tiles, thin ceramic slabs, non absorbent single-fired tiles, double-fired tiles, and natural stones (water stable), even large size, and glass mosaic in:
• Interior and exterior walls and floors
• Heavy duty areas
• In conjunction with ACQUASHIELD waterproofing systems
• On top of old wall and floor tiles

BENFERGRIP+ GREY 25KG

ADHESIVE

Hi-tech adhesive, extra-white, with no vertical sliding, frost-proof. Perfect for laying mosaic (glass, marble, porcelain), porcelain tiles and single-fired wall and floor tiles. Laying of thick floor coverings. High final resistances and extended open time.

TECHNICAL FEATURES

• Overlapping internal old floors
• Extra white
• High resistance to sliding
• Application without the need of spacers
• Perfect for glass and ceramic mosaics
• Perfect for Klinker and thick floor coverings
• Its smooth consistency reduces fatigue
• Long open time
• Tested in accordance with EN 12004, C2 TE
• Mixed with CEMLATEX 600 conforms to EN12004 C2 TE S2
• FLEXIBLE, deformability > 2 mm

Laying of porcelain, single fired and non-absorbent tiles, glass and ceramic mosaic, stable natural stones:
• For Interior and exterior walls and floors
• Suitable for heavy duty areas (with CEMLATEX 600)
• Private and public swimming pools (with CEMLATEX 600)

BENFERGRIP+ WHITE 25KG

ADHESIVE

Hi-tech adhesive, extra-white, with no vertical sliding, frost-proof. Perfect for laying mosaic (glass, marble, porcelain), porcelain tiles and single-fired wall and floor tiles. Laying of thick floor coverings. High final resistances and extended open time.

TECHNICAL FEATURES

• Overlapping internal old floors
• Extra white
• High resistance to sliding
• Application without the need of spacers
• Perfect for glass and ceramic mosaics
• Perfect for Klinker and thick floor coverings
• Its smooth consistency reduces fatigue
• Long open time
• Tested in accordance with EN 12004, C2 TE
• Mixed with CEMLATEX 600 conforms to EN12004 C2 TE S2
• FLEXIBLE, deformability > 2 mm

Laying of porcelain, single fired and non-absorbent tiles, glass and ceramic mosaic, stable natural stones:
• For Interior and exterior walls and floors
• Suitable for heavy duty areas (with CEMLATEX 600)
• Private and public swimming pools (with CEMLATEX 600)

DEKOGROUT 1-6 5KG

UNSANDED GROUT

Antibacterial, flexible, smooth cement-based grout.
DEKOGROUT is suitable for grouting glass mosaic, vitrified and fully vitrified clay tiles, brick tiles, tile slips, floor clinkers in bathrooms, showers and living rooms, on terraces, balconies and loggia. As well as facades, in swimming pools, commercial areas, and on heated and flow screeds.

TECHNICAL FEATURES

DEKOGROUT is suitable for grouting of natural stones, if the product-specific properties of the natural stone material permit this and discolouration (i.e. through stones physical characteristics) can be eliminated.

• Antibacterial and mould resistant
• Water repellent
• Resistant to freeze/thaw cycles
• Good application and wash-off properties
• Smooth surface and wide colour range (24 colours)
• For interior, exterior and under water
• Fulfils the requirements of EN 13888, CG2WA
• For joints from 1 - 6 mm wide
• Vapor permeable
• Suitable for heated floors and walls
• EC1 R PLUS: very low emission
• Colours matched to the DEKOSIL silicone system