ENDURE 8MM

SCORING WHEEL

FEATURES


RUBI ENDURE scoring wheels are made of high-quality tungsten carbide. Its unitary grinding guarantees an exact and precise incision angle in all units.

SPECIFICATIONS

ENDURE scoring wheels are ideal for obtaining excellent cuts in ceramic tiles with a high cutting difficulty, especially for all ceramic materials with rough and / or structured surface finishes (reliefs and textures ).

EXTREME 22MM

SCORING WHEEL

FEATURES

EXTREME scoring wheels and rollers are made of high quality tungsten carbide, with a special titanium carbide coating. Thanks to this coating, RUBI EXTREME rollers and scoring wheels suffer less wear during use. But in addition, the EXTREME scoring wheels and rollers when mounted on a bearing, completely eliminates the friction of the wheel itself with the wheel shaft. This combination allows the behavior of the EXTREME scoring wheel to be much superior to the rest, offering a soft scratch and a life of 300%, compared to SILVER scoring wheels and rollers under the same conditions of use.

SPECIFICATIONS

The EXTREME range of rollers are specially designed and recommended for scratching ceramic materials with rough and or structured finishes (textures or reliefs).

SILVER 18MM

SCORING WHEEL

FEATURES

SILVER RUBI wheels and rollers are made of sintered tungsten carbide. Each roller is rectified in a unitary way so that each diameter has an incision angle according to its function and use. Each roll diameter offers different results and performances, depending on the type of ceramic material.


The high wear resistance offered by RUBI carbide wheels guarantees the professional a life and quality of finish that lives up to expectations. For the correct operation of SILVER wheels and rollers, the scratching must always be continuous and homogeneous, without excessive pressure or unnecessary passes.

SPECIFICATIONS

SILVER RUBI wheels and rollers are suitable for scratching and subsequent separation of ceramic tiles of any type: tile (BIII), enameled stoneware (BIb - BIIa), rustic or extruded stoneware (AIb - AII) and of course porcelain stoneware (BIa), with cutting difficulties between low and medium.

SILVER 10MM

SCORING WHEEL

FEATURES

SILVER RUBI wheels and rollers are made of sintered tungsten carbide. Each roller is rectified in a unitary way so that each diameter has an incision angle according to its function and use. Each roll diameter offers different results and performances, depending on the type of ceramic material.


The high wear resistance offered by RUBI carbide wheels guarantees the professional a life and quality of finish that lives up to expectations. For the correct operation of SILVER wheels and rollers, the scratching must always be continuous and homogeneous, without excessive pressure or unnecessary passes.

SPECIFICATIONS

SILVER RUBI wheels and rollers are suitable for scratching and subsequent separation of ceramic tiles of any type: tile (BIII), enameled stoneware (BIb - BIIa), rustic or extruded stoneware (AIb - AII) and of course porcelain stoneware (BIa), with cutting difficulties between low and medium.

SILVER 8MM

SCORING WHEEL

FEATURES

SILVER RUBI wheels and rollers are made of sintered tungsten carbide. Each roller is rectified in a unitary way so that each diameter has an incision angle according to its function and use. Each roll diameter offers different results and performances, depending on the type of ceramic material.


The high wear resistance offered by RUBI carbide wheels guarantees the professional a life and quality of finish that lives up to expectations. For the correct operation of SILVER wheels and rollers, the scratching must always be continuous and homogeneous, without excessive pressure or unnecessary passes.

SPECIFICATIONS

SILVER RUBI wheels and rollers are suitable for scratching and subsequent separation of ceramic tiles of any type: tile (BIII), enameled stoneware (BIb - BIIa), rustic or extruded stoneware (AIb - AII) and of course porcelain stoneware (BIa), with cutting difficulties between low and medium.

SPEED-62 MAGNET

MANUAL TILE CUTTER

FEATURES

Aluminum lateral support and bigger breaker system.
For 72/92 models:
Reinforced SOFT-GRIP handle.
Lateral stop for repetitive cuts and 45 degrees square with quick lock.
Solid 20mm steel guides. Chromed and rectified with anti-corrosion treatment for greater resistance to twisting.
Multipoint breaker 1764lb (800kg) power.
Interchangeable scoring wheels from Ø1/4" (6mm) to Ø13/32"(10mm).
Ø5/16"(8mm) scoring wheel included.
Direct view of the scoring and cutting line.

SPECIFICATIONS

Cutting length - 24"
Diagonal cutting length - 17.7 x 17.7"
Cutting height - 0.11-0.59"
Separator power - 1764 lbs.
With carrying case

SPEED-92 MAGNET

MANUAL TILE CUTTER

FEATURES

Aluminum lateral support and bigger breaker system.
For 72/92 models:
Reinforced SOFT-GRIP handle.
Lateral stop for repetitive cuts and 45 degrees square with quick lock.
Solid 20mm steel guides. Chromed and rectified with anti-corrosion treatment for greater resistance to twisting.
Multipoint breaker 1764lb (800kg) power.
Interchangeable scoring wheels from Ø1/4" (6mm) to Ø13/32"(10mm).
Ø5/16"(8mm) scoring wheel included.
Direct view of the scoring and cutting line.

SPECIFICATIONS

Cutting length - 36-1/4"
Diagonal cutting length - 25 x 25"
Cutting height - 0.11-0.59"
Separator power - 1764 lbs.
With carrying case

TZ-1020

MANUAL TILE CUTTER

FEATURES

Excellent performance breaking system: Clean cuts with soft motion.
Includes Ø 0.31" (8mm) and 0.7" (18 mm) scoring wheels. Reinforced textile bag for transport and protection.
Robust chassis, guides and breaking system.
Swivel bracket with central pivot for fast and accurate measurement of angular cuts.
Adjustable lateral stop for repetitive cuts.
Base supplement for excellent ceramic support.
Easy to transport: rubber wheels with bearings and handle.
Interchangeable scoring wheels ranging from Ø5/16"(8mm) to Ø7/8" (22mm).

SPECIFICATIONS

Cutting length - 40.15 inch.
Diagonal cutting length - 2.7 x 2.7"
Cutting height - 0.11-0.82"
Separator power - 3307 lbs
With carrying case

TZ-1300

MANUAL TILE CUTTER

FEATURES

Excellent performance breaking system: Clean cuts with soft motion.
Includes Ø 0.31" (8mm) and 0.7" (18 mm) scoring wheels. Reinforced textile bag for transport and protection.
Robust chassis, guides and breaking system.
Swivel bracket with central pivot for fast and accurate measurement of angular cuts.
Adjustable lateral stop for repetitive cuts.
Base supplement for excellent ceramic support.
Easy to transport: rubber wheels with bearings and handle.
Interchangeable scoring wheels ranging from Ø5/16"(8mm) to Ø7/8" (22mm).

SPECIFICATIONS

Cutting length - 51.18 inch.
Diagonal cutting length - 3-1/2 x 3-1/2"
Cutting height - 0.11-0.82"
Separator power - 3307 lbs
With carrying case